1)
The objectives of this Code are achieved by measures, such as
those described in the acceptable solutions in Division B, that are
intended to allow the plumbing system to perform the following functions (see Appendix A):
-
F01
To minimize the risk of accidental ignition.
-
F02
To limit the severity and effects of fire or explosions.
-
F20
To support and withstand expected loads and forces.
-
F21
To limit or accommodate dimensional change.
-
F30
To minimize the risk of injury to persons as a result
of tripping, slipping, falling, contact, drowning or collision.
-
F31
To minimize the risk of injury to persons as a result
of contact with hot surfaces or substances.
-
F40
To limit the level of contaminants.
-
F41
To minimize the risk of generation of contaminants.
-
F43
To minimize the risk of release of hazardous substances.
-
F45
To minimize the risk of the spread of disease through
communal shower facilities.
-
F46
To minimize the risk of contamination of potable water.
-
F62
To facilitate the dissipation of water and moisture from
the building.
-
F70
To provide potable water.
-
F71
To provide facilities for personal hygiene.
-
F72
To provide facilities for the sanitary disposal of human
and domestic wastes.
-
F80
To resist deterioration resulting from expected service
conditions.
-
F81
To minimize the risk of malfunction, interference, damage,
tampering, lack of use or misuse.
-
F82
To minimize the risk of inadequate performance due to
improper maintenance or lack of maintenance.
-
F130
To limit the unnecessary demand and/or
consumption of water for fixtures.
-
F131
To limit the unnecessary demand and/or
consumption of water for fittings.