This information has been archived because it is outdated and no longer relevant. This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
3.2.3.7.(6) | Application | Intent |
| OP3 |
| Objective | OP3 Protection of Adjacent Buildings from Fire |
| Attribution | |
| Application | Application 1: Minimum fire-resistance rating of
an exposing building face, where a limiting
distance shown in Tables 3.2.3.1.B. or 3.2.3.1.D. for a Group E, or Group F, Division 1 or 2 occupancy classification permits an exposing
building face to have unprotected openings consisting
of more than 25% but less than 100% of the exposing
building face.
Exceptions:
except as exempted in:
This applies to buildings described
in Sentence 1.3.3.2.(1) of Division A.
Application 2: This also applies to exterior walls enclosing an attic or roof space located above an exposing
building face, as stated in Sentence 3.2.3.3.(1).
|
| Top of Page | |
| Intent | Intent 1: To limit the probability that an exposing building face
will have insufficient fire resistance, which could lead to the spread of
fire from the building to an adjacent building during the time required for
emergency responders to perform their duties, which could lead to damage to
adjacent buildings. |
| Top of Page |