Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

3.6.5.4.(2)
ApplicationIntent
OS1
ObjectiveOS1 Fire Safety
Attribution
[F02-OS1.2]
Application
Application 1: 
Maximum flame-spread rating and smoke developed classification of combustible coverings and linings, including associated adhesives and insulation, [of air duct systems], in buildings described in Sentence 1.3.3.2.(1) of Division A.
Application 2: 
This also applies to:
  • the fire safety characteristics of heating, ventilating and air-conditioning systems, as stated in Article 6.2.1.2., and
  • buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9], with respect to:
    • mechanical ventilation systems other than self-contained systems serving single dwelling units, as stated in Sentence 9.32.1.1.(2),
    • the ventilation of storage garages for more than 5 motor vehicles in residential occupancies, as stated in Sentence 9.32.1.1.(3),
    • mechanical ventilation systems used for the ventilation of rooms and spaces in dwelling units during the non-heating season, where natural ventilation is not provided in accordance with Article 9.32.2.2., as stated in Clause 9.32.2.1.(1)(b),
    • heating and air-conditioning systems other than those serving individual dwelling units, as stated in Sentence 9.33.1.1.(2), and
    • air duct distribution systems in which the rated heat input exceeds 120 kW, as stated in Sentence 9.33.6.1.(2).
Exceptions: 
except as exempted in Sentence 3.6.5.4.(3), which applies to the outer covering of ducts, plenums and other parts of air duct systems used within an assembly of combustible construction.
Top of Page
Intent
Intent 1: 
To limit the probability that coverings and linings will have inappropriately high flame-spread and smoke-development properties, which could lead to the development of an inappropriate amount of smoke and the spread of fire across the exposed surfaces of the material, which could lead to the spread of fire and smoke to other parts of the building by means of the air duct systems, which could lead to harm to persons.
Top of Page