This information has been archived because it is outdated and no longer relevant. This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.10.13.2.(2) | Application | Intent |
| OS1 | OP1 |
| Objective | OS1 Fire Safety |
| Attribution | |
| Application | Application 1: Maximum clearances beneath and at the sides and top
of doors described in Sentence 9.10.13.2.(1), which applies to 45-mm-thick,
solid-core wood doors used as closures in fire
separations, where the doors conform to CAN4-S113, “Wood Core
Doors Meeting the Performance Required by CAN4-S104 for Twenty Minute Fire-Rated
Closure Assemblies,” and:
This applies to buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9].
|
| Top of Page | |
| Intent | Intent 1: To supersede the clearances stated in NFPA 80, which is
referred to in Sentence 9.10.13.1.(1), in order to limit the probability
that fire will spread through gaps between a door and its frame, which could
lead to harm to persons in the area on the other side of the fire compartment.
|
| Top of Page |