Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

9.12.3.1.(1)
OS2OP2OH1OH4OS3
ObjectiveOS3 Safety in Use
Attribution
[F22-OS3.1] Applies to floors and elements that support floors.
[F22-OS3.7] Applies to walls, and elements that support walls, that contain doors or windows required for emergency egress.
Application
Application 1: 
Placement of backfill around the foundations of buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
Top of Page
Intent
Intent 1: 
To limit the probability that improperly placed backfill will lead to damage or displacement of foundation elements.
This is to limit the probability of compromised structural integrity, which could lead to:
  • structural failure,
  • for environmental separators or elements supporting an environmental separator, the displacement or failure of required environmental separation elements, which could lead to the deterioration of building elements, or
  • an inability to resist expected loads, which could lead to
    • the excessive deformation or deflection of walls, or
    • the excessive deflection or vibration of floors.
This is to limit the probability of:
  • persons losing their balance, tripping or falling, or
  • compromised operation of doors or windows required for egress in an emergency.
This is to limit the probability of harm to persons.
Top of Page