This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.13.2.6.(1) | Application | Intent |
OH1 | OS2 |
Objective | OH1 Indoor Conditions |
Attribution | |
Application | Application 1: Interior dampproofing for unit masonry or concrete
walls that are in contact with the ground, where the ground level outside
is higher than the ground level inside and a separate interior finish is applied
to the walls, or wood members are placed in contact with the walls for the
installation of insulation or an interior finish, in buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
Top of Page | |
Intent | Intent 1: To limit the probability of the transfer of moisture from
the ground through footings or walls, or the transfer of construction moisture
from the wall, into interior finishes or wood members. This
is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
Top of Page |