Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

9.27.9.5.(3)
ApplicationIntent
OH1OS2
ObjectiveOH1 Indoor Conditions
Attribution
[F61-OH1.1,OH1.2,OH1.3]
Application
Application 1: 
Support for vertical butt joints of plywood siding applied in horizontal lapped strips, where sheathing is not used, on buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
Top of Page
Intent
Intent 1: 
To limit the probability of inadequate support for butt joints, which could lead to:
  • an inadequate resistance to impact loads, which could lead to open joints, or
  • misalignment of vertical butt joints.
This is to limit the probability of:
  • precipitation or meltwater ingress, or
  • compromised thermal performance of components intended to provide resistance to heat transfer.
This is to limit the probability of:
  • an inadequate control of temperatures of interior spaces or relative humidity,
  • the generation of pollutants from biological growth or from materials that become unstable on wetting,
  • deterioration, which could lead to compromised integrity of exterior walls or elements protected by exterior walls, or
  • water accumulation in interior spaces.
This is to limit the probability of:
  • negative effects on the air quality of indoor spaces,
  • the inadequate thermal comfort of persons, and
  • contact with moisture.
This is to limit the probability of harm to persons.
Top of Page