This information has been archived because it is outdated and no longer relevant. This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.28.2.2.(2) | Application | Intent |
| OH1 | OS2 | OS1 | OS3 | OP1 |
| Objective | OS1 Fire Safety |
| Attribution | |
| Application | Application 1: Grading of aggregate for stucco, on buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
| Top of Page | |
| Intent | Intent 1: To limit the probability of inadequate compressive strength
or an inadequate resistance to shrinkage or freeze-thaw stresses, which could
lead to the delamination or cracking of stucco under gravity, wind or impact
loads, or freeze-thaw stresses. Where stucco is applied
to masonry chimneys, this is to limit the probability of precipitation or
meltwater ingress, which could lead to the premature failure of chimney liners,
which could lead to the escape of heat or flames, which could lead to the
ignition of combustible building components, which could lead to harm to persons.
|
| Top of Page |