This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.29.5.3.(1) | Application | Intent |
OS2 | OS1 | OH1 | OP2 |
Objective | OH1 Indoor Conditions |
Attribution | |
Application | Application 1: Maximum spacing of supports for nailed and screwed
single-layer installations of gypsum board interior wall and ceiling finishes
on wood furring or framing, in buildings to which
Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
Top of Page | |
Intent | Intent 1: To limit the probability of an inability to resist expected
impact, gravity or lateral loads, which could lead to the excessive sagging
of gypsum board. Where interior finishes support or serve
as required environmental separation elements, this is to limit the probability
of the deformation or detachment of interior finishes, which could lead to
the failure of required environmental separation elements, which could lead
to:
This is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
Top of Page |