This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.29.5.4.(1) | Application | Intent |
OS2 | OH1 | OS1 | OP2 |
Objective | OH1 Indoor Conditions |
Attribution | |
Application | Application 1: Minimum thickness of single-layer installations of
gypsum board interior wall and ceiling finishes that support insulation and
are nailed or screwed to wood furring or framing, in buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
Top of Page | |
Intent | Intent 1: To limit the probability of insufficent strength, which
could lead to an inability to resist expected gravity loads, which could lead
to the excessive sagging of gypsum board. Where interior
finishes support or serve as required environmental separation elements, this
is to limit the probability of the deformation or detachment of interior finishes,
which could lead to failure or compromised performance of required environmental
separation elements, which could lead to:
This is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
Top of Page |