This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.29.5.6.(1) | Application | Intent |
OS2 | OS1 | OH1 | OP2 |
Objective | OH1 Indoor Conditions |
Attribution | |
Application | Application 1: Nails for single-layer installations of gypsum board
interior wall and ceiling finishes on wood furring or framing, in buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
Top of Page | |
Intent | Intent 1: To limit the probability that the performance of nails will
fall significantly below expectations, which could lead to an inability to
resist expected impact, gravity or lateral loads. Where
interior finishes support or serve as required environmental separation elements,
this is to limit the probability of the deformation or detachment of interior
finishes, which could lead to the failure of required environmental separation
elements, which could lead to:
This is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
Top of Page |