Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

9.14.2.1.(2)
ApplicationIntent
OH1OS2OS2OP2OH1OH4OS3
ObjectiveOH1 Indoor Conditions
Attribution
(b) [F21-OH1.1,OH1.2,OH1.3] Applies where foundations serve as or support an environmental separator.
Application
Application 1: 
Crushed rock backfill that is installed adjacent to the exterior surface of foundation walls of buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
Exceptions: 
except for:
  • the foundation walls of crawl spaces whose exterior walls have 25% or more of their total area above exterior ground level open to the outdoors [see Sentence 9.18.1.1.(1)] and where drainage can be shown to be unnecessary [see Sentences 9.18.5.1.(1) and (2)],
  • foundation walls that are subject to continuous hydrostatic pressure, and
  • foundation walls that are effectively drained by the native soil or that have otherwise demonstrated that they do not require drainage.
Top of Page
Intent
Intent 1: 
To limit the probability of excessive lateral loading on foundation walls, which could lead to the movement or cracking of the foundation walls or building superstructures.
This is to limit the probability of:
  • excessive heat transfer,
  • pollutant ingress (from the exterior or from adjacent interior space, including soil gas, combustion products from parking garages, and particulates),
  • precipitation ingress,
  • condensation, or
  • moisture ingress from the ground.
This is to limit the probability of:
  • an inadequate control of the temperature of interior spaces, relative humidity or water accumulation,
  • the generation of pollutants from biological growth or from materials that become unstable on wetting, or
  • deterioration, which could lead to compromised integrity of elements supported by foundation walls.
This is to limit the probability of:
  • negative effects on the air quality of indoor spaces,
  • the inadequate thermal comfort of persons, and
  • contact with moisture.
This is to limit the probability of harm to persons.
Top of Page