This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.20.17.2.(2) | Application | Intent |
OS2 | OP2 | OH1 | OH4 | OS3 |
Objective | OS3 Safety in Use |
Attribution | |
Application | Application 1: Vertical reinforcement in flat insulating concrete
form walls not in contact with the ground, in buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9], where:
Exceptions:
except as stated in Sentence 9.20.1.1.(2), which applies to
insulating concrete form walls other than those described above, or where
the walls are designed for specified loads on the basis of ultimate and serviceability
limit states.
|
Top of Page | |
Intent | Intent 1: To limit the probability that the placement or amount and
spacing of vertical reinforcement will not be adequate to ensure the reinforcement
is encased and bonded to the concrete, which could lead to an inadequate resistance
to expected loads, which could lead to concrete cracking or the displacement
of walls. This is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
Top of Page |