Intent 1:
To limit the probability of:
- concentrations of stress in areas that typically experience
higher levels of lateral stress (e.g. around openings), which could
lead to an inability to resist transverse or vertical loads, and
- inadequate load distribution among the wythes of multiple-wythe
masonry walls.
This is to limit the probability of
cracking or buckling.
Where masonry units support or are part of an environmental
separator, this is to limit the probability of:
- excessive moisture transfer through masonry units, or
- deformation or cracking, which could lead to the displacement
or failure of required environmental separation elements.
This is to limit the probability of:
- condensation,
- precipitation ingress,
- moisture ingress,
- excessive heat transfer,
- pollutant ingress, or
- compromised thermal performance of components intended
to resist heat transfer.
This is to limit the probability of:
- an inadequate control of temperatures in interior spaces,
drafts, relative humidity or water accumulation,
- the generation of pollutants from biological growth
or from materials that become unstable on wetting, or
- deterioration, which could lead to further compromised
integrity of environmental separators.
This is to limit the probability of:
- negative effects on the air quality of indoor spaces,
- the inadequate thermal comfort of persons, and
- contact with moisture.
This is to limit the probability of harm to persons.