Intent 1:
To limit the probability of:
- flexural failure of the masonry spanning between intermediate
tie locations,
- tie pullout or pushthrough (i.e. embedment failure),
- ties buckling, or
- tie material failure.
This is to limit the probability of
cracking or buckling of cavity wall constructions in areas that typically
experience higher levels of lateral stress, such as near floor or
roof assemblies.
This is to limit the probability of compromised structural
integrity, which could lead to:
- structural failure of masonry construction, or
- where masonry construction is part of an environmental
separator, the excessive deformation, displacement or failure of required
environmental separation elements, which could lead to deterioration,
which could lead to further compromised structural integrity.
This is to limit the probability of:
- condensation,
- precipitation ingress,
- moisture ingress,
- excessive heat transfer,
- pollutant ingress, or
- compromised thermal performance of components intended
to resist heat transfer.
This is to limit the probability of:
- an inadequate control of temperatures in interior spaces,
drafts, relative humidity or water accumulation,
- the generation of pollutants from biological growth
or from materials that become unstable on wetting, or
- deterioration, which could lead to further compromised
integrity of environmental separators.
This is to limit the probability of:
- negative effects on the air quality of indoor spaces,
- the inadequate thermal comfort of persons, and
- contact with moisture.
This is to limit the probability of harm to persons.