This information has been archived because it is outdated and no longer relevant. This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.24.1.4.(1) | Application | Intent |
| OP2 | OS2 | OH1 | OS1 | OS3 |
| Objective | OH1 Indoor Conditions |
| Attribution | |
| Application | Application 1: Screws for fastening cladding, sheathing or interior
finish materials to steel studs, runners and furring channels, in non-loadbearing exterior walls of buildings to
which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application
of Part 9]. |
| Top of Page | |
| Intent | Intent 1: To limit the probability that the performance and physical
properties of steel screws, with respect to withdrawal resistance, pull-through
resistance or shear strength, will fall significantly below expectations,
which could lead to an inability to resist expected lateral and gravity loads.
For steel stud walls that support or are part of an environmental
separator, this is to limit the probability of the excessive movement or deformation
of walls, which could lead to the excessive deformation, displacement or failure
of required environmental separation elements, which could lead to:
This is to limit the probability of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
|
| Top of Page |