Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

9.28.2.2.(1)
ApplicationIntent
OH1OS2OS1OS3OP1
ObjectiveOS2 Structural Safety
Attribution
[F80-OS2.3]
Application
Application 1: 
Types and characteristics of aggregate for stucco, on buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
Top of Page
Intent
Intent 1: 
To limit the probability of excessive shrinkage or inadequate compressive strength, bond strength or paste-to-aggregate bond strength, which could lead to the delamination or cracking of stucco under gravity, wind or impact loads, or freeze-thaw stresses.
This is to limit the probability of:
  • precipitation or meltwater ingress, which could lead to deterioration, which could lead to the structural failure of exterior walls or elements protected by exterior walls, or
  • stucco detaching and falling from the building.
This is to limit the probability of harm to persons.
Top of Page