This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
5.10.1.1.(1) | Application | Intent |
OH1 | OS2 | OS3 | OH4 | OS1 |
Objective | OS1 Fire Safety |
Attribution | |
Application | Application 1: Performance criteria and installation methods for
materials, components and their connections, for which a standard is listed
in Table 5.10.1.1.
Application 2: This also applies to cladding assemblies installed
on buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] where:
Application 3: This also applies to the position of low air and vapour
permeance materials within the building assembly
relative to the position of materials providing thermal resistance in the
assemblies of buildings to which Part 9 applies
[see Sentence 1.3.3.3.(1) of Division A for application of Part 9], where
the building assembly:
Application 4: This also applies to the design of vapour
barriers in buildings to which Part 9 applies
[see Sentence 1.3.3.3.(1) of Division A for application of Part 9], where
the building assembly is more susceptible to condensation
[see Sentences 9.25.4.2.(2) and (3) for combinations of interior and exterior
environmental conditions that create a higher risk for condensation].
Exceptions:
except as stated in:
|
Top of Page | |
Intent | Intent 1: To limit the probability:
Where required life safety systems are incorporated
in environmental separators, this is to limit the probability of compromised
operation of temperature-sensitive or moisture-sensitive life safety systems,
which could lead to harm to persons.
|
Top of Page |