Warning This information has been archived because it is outdated and no longer relevant.

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

9.3.2.9.(3)
ApplicationIntent
OS2OP2OH1OH4OS3OS1
ObjectiveOH1 Indoor Conditions
Attribution
[F82,F80,F61,F55-OH1.1,OH1.2] [F82,F80,F61-OH1.3] Applies where structural wood elements support or are used in an environmental separator.
Application
Application 1: 
Pressure treatment of structural wood elements with a preservative, where the structural wood elements are:
  • less than 150 mm above ground, or
  • not protected from exposure to precipitation, where the configuration is conducive to moisture accumulation and the moisture index is greater that 1.0.
This applies to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
Top of Page
Intent
Intent 1: 
To limit the probability of wood decay.
Where structural wood elements support or are used in an environmental separator, this is to limit the probability of compromised performance of the building envelope, which could lead to:
  • condensation,
  • precipitation ingress, or
  • compromised thermal performance of components intended to provide resistance to heat transfer.
This is to limit the probability of:
  • an inadequate control of indoor air and surface temperatures, drafts, relative humidity, or water accumulation,
  • the generation of pollutants from biological growth or from materials that become unstable upon wetting, or
  • deterioration, which could lead to further compromised integrity of environmental separators.
This is to limit the probability of:
  • negative effects on the air quality of indoor spaces,
  • the inadequate thermal comfort of persons, and
  • contact with moisture.
This is to limit the probability of harm to persons.
Top of Page