This information has been archived because it is outdated and no longer relevant. This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.21.2.1.(3) | Application | Intent |
| OS3 | OH1 |
| Objective | OH1 Indoor Conditions |
| Attribution | |
| Application | Application 1: Chimney flues serving
solid-fuel-burning appliances having a combined
total rated heat output of 120 kW or less, where rectangular masonry or concrete chimneys are not more than 12
m in height, in buildings to which Part
9 applies [see Sentence 1.3.3.3.(1) of Division A for application of
Part 9]. Application 2: This also applies to chimney flues serving solid-fuel-burning appliances having
a combined total rated heat output of 120 kW or less, where rectangular masonry or concrete chimneys are not more than 12
m in height, in buildings to which Part
6 applies [see Sentence 1.3.3.2.(1) of Division A for application of
Part 6], as stated in Sentence 6.3.1.2.(1).
Exceptions:
except for the installation of appliances where
an adequate draft is maintained for each appliance and
the installation of both appliances meets the requirements
of the relevant standards referenced in Article 9.33.5.2.
|
| Top of Page | |
| Intent | Intent 1: To limit the probability that combustion products will spill
from one or more appliances into living space, which could lead to negative
effects on the air quality of indoor spaces, which could lead to harm to persons.
|
| Top of Page |