This information has been archived because it is outdated and no longer relevant.
Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.
9.27.3.8.(2) | Application | Intent |
OS2 | OH1 | OS2 | OH1 |
Objective | OH1 Indoor Conditions |
Attribution | |
Application | Application 1: Flashing for horizontal joints in cladding, and where
cladding substrates change and the substrates differ sufficiently for stresses
to be concentrated along the line of horizontal change, in cladding assemblies
to which Subsection 9.27.3. applies [see Article 9.27.1.1. for
application of Subsection 9.27.3., and where the cladding above
and below the joint is outboard of a drained and vented air space.
|
Top of Page | |
Intent | Intent 1: To limit the probability of an inadequate dissipation of
precipitation or meltwater to the exterior, which could lead to the excessive
accumulation of moisture. This is to limit the probability
of:
This is to limit the probability of:
This is to limit the probability of harm to persons.
Intent 2: To limit the application of Sentence 9.27.3.8.(1),
where the wall assembly is constructed such that:
|
Top of Page |