Intent 1:
To limit the probability of fastening cladding to
an inappropriate substrate.
This is to limit the
probability of:
- an inadequate resistance to expected gravity loads and
lateral wind loads, or
- where panel-type siding is installed as bracing to satisfy Subclause 9.23.13.1.(2)(a)(i) and Clause 9.23.13.6.(1)(a), an inadequate
resistance to expected lateral loads, which could lead to racking
of exterior walls.
This is to limit the probability of:
- the displacement of cladding, trim and flashing, the
opening of joints or the failure of caulking, or
- where panel-type siding is installed as bracing to satisfy Subclause 9.23.13.1.(2)(a)(i) and Clause 9.23.13.6.(1)(a), the displacement
or failure of other required environmental separation elements.
This is to limit the probability of:
- precipitation or meltwater ingress, or
- compromised thermal performance of components intended
to provide resistance to heat transfer.
This is to limit the probability of:
- an inadequate control of the temperature of interior
spaces or relative humidity,
- the generation of pollutants from biological growth
or from materials that become unstable on wetting,
- deterioration, which could lead to compromised integrity
of exterior walls or elements protected by exterior walls, or
- water accumulation in interior spaces.
This is to limit the probability of:
- negative effects on the air quality of indoor spaces,
- the inadequate thermal comfort of persons, and
- contact with moisture.
This is to limit the probability of harm to persons.